31 May 2018
21 Best Brass Machine Screws
Solid Brass Machine Screw hex nuts 5/16-18 Qty 25 - 562″)drive style9/16″ socketmaterialsolid brasstensile strength50,000, 65,000 psiyield30,000-50,000 psihardness40, 75 rockwell b min. Package quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Thread count18thickness / height7/32″width across flats9/16″ (0. Tensile strength, a common measure to compare the strength of a fastener. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. It is the load needed to pull the fastener apart. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”.
Knurled Head Thumb Screws – Solid Brass Machine Screws – 1/4″-20 x 3/4″ QTY 100 - Thread direction right hand. Head diameter max 23/32″ head height 1/2″. Hardness 40-75 rockwell b. Body diameter (1/4″) max 02489, min 02408 (class 2a fit, ansi b11). Thread pitch 20 per inch.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #6-32 x 3/4″ QTY 1000 - Head diameter max 3/8″ head height 1/4″. Body diameter (#6) max 01372, min 01312 (class 2a fit, ansi b11). Thread direction right hand. Hardness 40-75 rockwell b. Thread pitch 32 per inch.
8/32 X 1/2″ Brass Round Head Slotted Machine Screws (Pack of 12) - Phillips drive size #2. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Head height 0120″. 8/32 x 1/2″ brass round head slotted machine screws (pack of 12). Head diameter 0309″.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-32 x 5/8″ QTY 25 - Head diameter max 9/16″ head height 3/8″. Hardness 40-75 rockwell b. Thread direction right hand. Thread pitch 32 per inch. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11).
Brass Machine Screw, Plain Finish, Flat Head, Slotted Drive, 1-1/2″ Length, #8-32 Threads (Pack of 100) - Brass provides corrosion resistance and offers thermal and electrical conductivity. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Plain surface has no finish or coating. Slotted drive has a linear slot for use with a flat-blade driver.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #8-32 x 1/2″ QTY 25 - Head diameter max 15/32″ head height 1/4″. Hardness 40-75 rockwell b. Body diameter (#8) max 01631, min 01571 (class 2a fit, ansi b11). Thread pitch 32 per inch. Thread direction right hand.
10/32 X 1-1/2″ Brass Flat Head Phillips Machine Screws (Pack of 12) - Ensure a lasting hold for any project. 10/32 x 1-1/2″ brass flat head phillips machine screws (pack of 12). Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Hex nuts are appropriate for use in low-strength assemblies. Drive system is a hexagon-shaped head.
Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 1/4″ Length, #6-32 Threads (Pack of 100) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The round head has a domed shape. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The brass machine screw has a plain finish and a round head with a slotted drive. The slotted drive has a linear slot for use with a flat-blade driver. The material is nonmagnetic. Brass provides corrosion resistance and offers thermal and electrical conductivity.
1/4″-20×2 1/2″ PHIL PAN HEAD Brass Machine Screw (100/box) - Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 330 brass provides corrosion resistance and offers thermal and electrical conductivity. Pan head has a flat top and short vertical sides with a rounded top edge.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-24 x 3/4″ QTY 25 - Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread direction right hand. Hardness 40-75 rockwell b. Head diameter max 9/16″ head height 3/8″. Thread pitch 24 per inch.
330 Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 1/2″ Length, #2-56 Threads (Pack of 100) - The 330 brass alloy provides corrosion resistance and offers thermal and electrical conductivity. The 330 brass machine screw has a plain finish and a round head with a slotted drive. The material is nonmagnetic. The slotted drive has a linear slot for use with a flat-blade driver. The round head has a domed shape. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.
Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, Meets ASME B18.6.3, 3/4″ Length, Fully Threaded, #10-32 UNF Threads (Pack of 50) - The brass machine screw has a plain finish and a round head with a slotted drive, and meets american society of mechanical engineers asme b18. The slotted drive has a linear slot for use with a flat-blade driver. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. 3 specifications. 6. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The round head has a domed shape. The material is nonmagnetic. Brass provides corrosion resistance and offers thermal and electrical conductivity.
8/32 X 3/4″ Brass Round Head Slotted Machine Screws (Pack of 12) - 8/32 x 3/4″ brass round head slotted machine screws (pack of 12). Hardness 40-75 rockwell b. Thread pitch 24 per inch. Head diameter max 9/16″ head height 3/8″. Thread direction right hand.
Solid Brass Machine Screw hex nuts 6-32 Qty 50 - Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strength, a common measure to compare the strength of a fastener. Package quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. It is the load needed to pull the fastener apart. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. 312″)drive style5/16″ socketmaterialsolid brasstensile strength50,000, 65,000 psiyield30,000-50,000 psihardness40, 75 rockwell b min. Thread count32thickness / height7/64″width across flats5/16″ (0. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.
Brass Machine Screw, Plain Finish, Flat Head, Slotted Drive, 3/32″ Length, #000-120 UNM Threads, Made in US (Pack of 100) - Brass provides corrosion resistance and offers thermal and electrical conductivity. Plain surface has no finish or coating. Slotted drive has a linear slot for use with a flat-blade driver. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Made in usa.
Knurled Head Thumb Screws – Solid Brass Machine Screws – 1/4″-20 x 2″ QTY 25 - Thread pitch 20 per inch. Head diameter max 23/32″ head height 1/2″. Body diameter (1/4″) max 02489, min 02408 (class 2a fit, ansi b11). Hardness 40-75 rockwell b. Thread direction right hand.
Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 1/4″ Length, #6-32 Threads (Pack of 100) - Plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Brass provides corrosion resistance and offers thermal and electrical conductivity.
SOLID BRASS MACHINE SCREWS PAN HEAD SLOTTED M4 4MM X 50MM ( pack of 10 ) - Designed for use with nuts or pre tapped holes. Machine screw, slotted pan head, solid brass for increased durability. .
Knurled Head Thumb Screws – Solid Brass Machine Screws – #10-24 x 1″ QTY 25 - Head diameter max 9/16″ head height 3/8″. Body diameter (#10) max 01890, min 01818 (class 2a fit, ansi b11). Thread direction right hand. Hardness 40-75 rockwell b. Thread pitch 24 per inch.
SOLID BRASS MACHINE SCREWS PAN HEAD SLOTTED M3 3MM X 20MM ( pack of 10 ) - . Designed for use with nuts or pre tapped holes. Machine screw, slotted pan head, solid brass for increased durability.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.