JET 322406 Lathe with ACU-RITE VUE DRO and Taper Attachment & Collet Closer
- Includes factory warranty. Uniquely designed exclusively by jet. Splined, not keyed, shafts are utilized in the headstock. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings.
TTC Set of 1 Square, 1 Hex, and 1 Collet Closer – Size: Set
- An effective short run jig for machining parallel, square or hex shapes as well as cross hole drilling at 60°, 90° or 120°. Designed for the popular 5c round, hex or square collet. Blocks can be held directly on a magnetic chuck or in a machine vise. For simplified set-ups on drill presses, milling machines, lathes and surface grinders. Quick acting collet closer (#cb5l) is interchangeable on either collet block.
Jet 323104 GHB-1340A Lathe With Newall DP500 DRO With Taper Attachment and Collet Closer
- Chrome molybdenum headstock gears are hardened, ground and shaved. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Uniquely designed exclusively by jet. Includes factory warranty.
JET GH1440ZX Lathe with ACU-RITE 200S DRO and Collet Closer Installed
- Uniquely designed by jet. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Iso9001 certified manufacturer. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved.
JET GH-1340W-1 Lathe with C80 DRO and Collet Closer
- Uniquely designed exlcusively by jet. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Splined, not keyed, shafts are utilized in the headstock. Hardened and ground gears are featured in the headstock and gearbox.
5C-CB 5C Collet Block Set – Hex Collet Block, Square Collet Block and Collet Closer
- For fast, short run, set-ups. Parallel and square to +/-. 0005″. Made of tool steel, hardened and ground. Each block comes complete with ring closer. Takes 5c collets from 1/16″ to 1 1/16″. Size 1 3/4″ x 1 3/4″ x 3 1/4″. Perfect for 60 degree, 90 degree, & 120 degree grinding or milling on parallel flats, squares, triangles (with vee block), hexes, etc.
JET 321391 Lathe with 300S DROTaper Attachment and Collet Closer
- Includes factory warranty. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Uniquely designed exclusively by jet. Iso 9001 certified manufacturer. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required.
5C Collet Block Chuck Hex Square Closer Rings Milling Lathe Grinder
- 5 pc square, hex, quick acting ring & lever collet closer cam operated. Capacity for standard 5c collet 1/16 ~ 1-1/16. 5c hex & square collet block chucks. Quantity 1. Made of steel hardened and ground to 0005″.
JET GH-1340W-1 Lathe with ACU-RITE 200S DRO Taper Attachment and Collet Closer Installed
- D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. Hardened and ground gears are featured in the headstock and gearbox.
JET 321613 Lathe with 300S DRO and Collet Closer
- 3-1/8 bore spindle is supported by two tapered and one ball bearing. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Includes factory warranty. Includes factory warranty. Uniquely designed exclusively by jet.
JET GHB-1340A Lathe with Collet Closer and Tak
- Enclosed gearbox design provides smooth, quiet operation. Hardened and ground gears are featured in the headstock and gearbox. One of the most popular jet lathes now comes with an enclosed gearbox as a standard feature. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Fast, easy speed changes.
Sherline 1153 – Collet Closer Stop Kit
- If the scribed line can be seen, the next shorter rod should be substituted. Included are four different length rods for various ranges of adjustment. Sherline 1153, collet closer stop kitthe stop block threads into the back of the collet knob. With the proper rod in place, the material is inserted in the collet until it hits the stop, providing a consistent position for a series of identical parts. 5″ from the end of each rod shows when the rod is extended past a safe operating distance from the end of the spindle. Please note that pictured is the collet closer itself and is for reference only, the collet closer is sold separately. The rods are held in place by a set screw. This listing is for the collet closer stop kit. A scribed mark 1.
JET GH-1340W-3 Lathe with Collet Closer Installed
- Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Uniquely designed exclusively by jet. Splined, not keyed, shafts are utilized.
JET 321526 Lathe with 200S DRO & Collet Closer
- Splined, not keyed, shafts are utilized. Uniquely designed exclusively by jet. Headstock is constantly oiled during operation. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox.
JET GH-1440W-3 Lathe with Collet Closer
- Headstock is constantly oiled during operation. Uniquely designed exclusively by jet. D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. Hardened and ground gears are featured in the headstock and gearbox. Splined, not keyed, shafts are utilized in the headstock.
JET GH-1660ZX Lathe with 2-axis ACU-RITE 200S, Taper Attachment and Collet Closer Installed
- Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. 3-1/8 bore spindle is supported by two tapered and one ball bearing. Iso 9001 certified manufacturer. Uniquely designed exclusively by jet. Chrome molybdenum headstock gears are hardened, ground and shaved.
JET CC-ZX, Collet Closer for All ZX Lathe Models
- Rear mounted lever action. Uses 5c collets. Precision ground components. Specially designed for each model. Collet closer.
JET 321592 Lathe with 300S DRO and Collet Closer
- Hardened and ground gears are featured in the headstock and gearbox. Splined, not keyed, shafts are utilized. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Includes factory warranty.
JET GH-1440W-1 Lathe with Collet Closer Installed
- Hardened and ground gears are featured in the headstock and gearbox. Headstock is constantly oiled during operation. Uniquely designed exclusively by jet. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Splined, not keyed, shafts are utilized.
JET GHB-1340A Bench Lathe with Collet Closer
- Hardened and ground gears are featured in the headstock and gearbox. One of the most popular jet lathes now comes with an enclosed gearbox as a standard feature. Change gears allow metric threading. Enclosed gearbox design provides smooth, quiet operation. Fast, easy speed changes.
JET GH-1440ZX Lathe with 300S DRO, TAK and Collet Closer
- Uniquely designed exclusively by jet. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Iso 9001 certified manufacturer. 3-1/8″ bore spindle is supported by two tapered and one ball bearing.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
