NailPro 3″ Inch by 0.131 -1000 Pcs. per Carton- Type 304 Stainless Steel 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails
- 9/32″ full round head diameter. Fits 20-22 degree nailers. Type 304 stainless steel, ring shank. 3″ x 131 plastic strip nails.
NailPro 1-1/2 Inch by .093 – Ring Shank Siding Nails – 15 Degree Wire Coil – 316 Stainless Steel (Marine Grade) – 3600 pc. / CTN
- Fits 15 degree coil siding nailers. 7/32″ head diameter. Type 316 stainess steel (marine grade). Ring shank.
Minuteman 1 3/4″ Aluminum Ring Shank Nails with rubber washers (x100)
- Clear, resealable, reusable, stackable plastic tub. Use these nails with grip-rite grtrh350 21-degree full round head framing nailer and many other models. Tub of 500 3-inch by 120-inch 21-degree plastic collated stick framing nails. 1 3/4″ aluminum ring shank nails w/ rubber washers. 500 nails weighs 48 pounds shipped.
NailPro 2 Inch by 0.093 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Siding Nail 3600 pc. / CTN
- Ring shank. 15/64″ head diameter. Type 304 stainless steel. Fits 15 degree coil siding nailers.
DeWalt DEWDT99628RS – DT99628RS Stainless Steel Ring Shank Nails 2.8 x 63mm
- The nails are suitable for any site environment. The nails are fully tested to work with the dewalt framing nailer, providing the best level of performance between nail and nail gun. Finish stainless steel. Pack quantity 2,200. This dewalt range of clipped head nails are qualified to eurocode 5 standard and cover service classes 1,2 & 3. 8 x 63mm. Applications perfect for the assembly of roofing timbers, fascias, panelling, decking and fencingthe dewdt99528rb clipped head nails have the following specifications type ring shank size 2.
NailPro 3 Inch by 0.120 Type 304 Stainless Steel 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip Ring Shank Full Head Collated Framing Nails (1000 Piece Carton)
- These collated framing nails are approved for use in acq lumber. Type 304 stainless steel, ring snank, annular thread. 3″ x 120 plastic strip nails. Full round head 9/32″ diameter. Fits 20-22 degree nailers.
NailPro 3 Inch by 0.120 – 2000 Pcs. per Carton – Type 304 Stainless Steel – 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails
- 9/32″ full round head diameter. 3″ x 120 plastic strip nails. Fits 20-22 degree nailers. Type 304 stainless steel, ring shank.
NailPro 1-1/2-Inch by 0.120 – 15 Degree Wire Coil Ring Shank Roofing Nail – Stainless Steel -720 pc. Stack Pack
- 3/8″ head diameter. Fits 15 degree coil roofing nailers. Type 304 stainless steel. Ring shank.
Anchor 238X113SPSSRZ 2-3/8-Inch by 0.113 30-33 Degree Paper Tape Clipped Head Stainless Steel Ring Shank Nail 500/CTN
- Fits 30-33 degree clipped head framing tools. 2-3/8-inch by 113 stainless steel. Conforms to astm-153b standards. Ring shank. 500 per box.
B&C Eagle 112X092HDRPC Round Head 1-1/2-Inch x .092 x 15 Degree Hot Dip Galvanized Ring Shank Plastic Collated Coil Nails (6,000 per box)
- New and improved packaging helps protect product during shipment. Full round head. Hot dip galvanized coating resists corrosion and rust for interior and exterior use rated for use in treated lumber. Plastic collated ring shank. For use in 15 degree mini coil siding and framing nailers.
Maze Nails H534a050 Ring Shank Hardened Pole Barn Nail, 8″ Long
- Highlights gauge 80d length 8″ 5-1/2 gauge oil-quenched hardened ring shank nails that comply with the astm standard specification f1667 for driven fasteners bulk 50# box made in the usa from recycled steel, qualifies for leed credits.
NailPro 3-1/4″ Inch by 0.131 – 1000 Pcs. per Carton- Type 304 Stainless Steel 21 Degree (Fits 20-22 Degree Nailers) Plastic Strip – Ring Shank – Full Head Nails
- Type 304 stainless steel, ring shank. 9/32″ full round head diameter. 3-1/4″ x 131 plastic strip nails. Fits 20-22 degree nailers.
NailPro 1-3/4 Inch by 0.093 – Ring Shank Siding Nail – 15 Degree Wire Coil – Stainless Steel – 3600 pc. / CTN
- Fits 15 degree coil siding nailers. 15/64″ head diameter. Ring shank. Type 304 stainless steel.
Spot Nails Spot Nails CW3D083R 1-1/4-inch by .083-inch Wire Coil Ring Shank Nails 14,000 per Box
- . Spot nails is the top manufacturer of interchange tools and fasteners with a large selection in most every collated category. Their products are manufacture red to the highest quality standards for the professional contractor.
Maze Regular Underlayment Ring Shank Nails – 1 Each
- Recommended by plywood producers for underlayment, sheathing, and sub-floor applications. Regular steel shank., Length 1″, pkg size 1 lb, diameter 14 ga, head diameter 3/16″, shank type sharp ring, material steel, pkg qty 640, package type box. Maze regular underlayment ring shank nails, sharp ring shanks insure holding power.
NailPro 2-1/2 Inch by 0.093 – 15 Degree Wire Coil – Stainless Steel – Ring Shank Siding Nail 3600 pc. / CTN
- Fits 15 degree coil siding nailers. Ring shank. 15/64″ head diameter. Type 304 stainless steel.
Spot Nails Spot Nails CW6D083R 2-inch by .083-inch Wire Coil Ring Shank Nails 11,200 per Box
- Their products are manufacture red to the highest quality standards for the professional contractor. . Spot nails is the top manufacturer of interchange tools and fasteners with a large selection in most every collated category.
B&C Eagle 134X090HDRC Round Head 1-3/4-Inch x .090 x 15 Degree Hot Dip Galvanized Ring Shank Wire Collated Coil Framing Nails (5,400 per box)
- New and improved packaging helps protect product during shipment. Wire collated ring shank. Hot dip galvanized coating resists corrosion and rust for interior and exterior use rated for use in treated lumber. Full round head. For use in 15 degree mini coil siding and framing nailers.
B&C Eagle 134X092HDRPC Round Head 1-3/4-Inch x .092 x 15 Degree Hot Dip Galvanized Ring Shank Plastic Collated Coil Framing Nails (6,000 per box)
- For use in 15 degree mini coil siding and framing nailers. Plastic collated ring shank. Full round head. Hot dip galvanized coating resists corrosion and rust for interior and exterior use rated for use in treated lumber. New and improved packaging helps protect product during shipment.
Paslode 650527 3-Inch by .120 Ring Shank GalvGuard 1M Fuel and Nail Pack
- For use only with paslode’s cf325 cordless framing nailer. Galvguard hot dipped galvanized strip fasteners featuring premium corrosion and streak protection for use in all pressure treated lumber applications, including acq. The right amount of fuel packed in with the right amount of nails. Paslode’s new 30 degree roundrive paper tape nails have full round heads with patented paper tape collation. New orange quicklode fuel offers a patented no-step design with no snapping, no twisting, no aligning just drop it in and go.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
