Greenlee Drill/Tap/Countersink, Hss, 10-24
- Drill/tap/countersink, cutting direction right hand, high speed steel, uncoated finish, size 10-24, overall length 2-3/50 in. , Shank type 1/4 in. Quick change hex, includes plastic case and quick change adapter.
TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- 2 pc 6-32 combination drill and tap multi use deburr countersink hex bit. Drill, tap and deburr in one operation tapered tap design prevents thread damage from over-drilling. 135 self-centering split point tip 10 gauge (35mm) capacity usage suggestions use of cutting coil recommended clean tap of metal chips to extend life reverse drill to back out after completing tap. Made of high speed m2 steel for use with steel, copper, brass, aluminum drill, tap and deburr in one operation. One piece construction guarantees proper drill for tap size.
Bestgle 6Pcs SAE Combination Drill Tap Bit Set 1/4-Inch Hex Shank HSS Deburr Countersink Bits Kit 6-32NC 8-32NC 10-32NC 10-24NC 12-24NC 1/4-20NC
- Suitable for tapping on wood or other soft metal,such as plank, aluminum plate and sheet iron etc, but not for stainless steel. Made of hardened 4341 hss, high quality with good durability for you to use. Sae tap drill bit size 6-32nc(35mm),8-32nc( 42mm),10-32nc( 5mm),10-24nc( 5mm),12-24nc( 57mm),1/4-20nc( 635mm). 1/4 inch (635mm) hex shank combination drill tap bit, back tapered beyond tap to prevent thread damage from over-drilling. Drilling and tapping, deburring and countersinking in one, one-step processing, improve working efficiency, saves labor and time.
Greenlee Drill/Tap/Countersink Set, Sae, 6 Pc
- Made in china. Commercial brand greenlee.
IRWIN HANSON 1/4″ – 28 NF Tap and No. 3 Drill Bit Set, 80232
- Tap crafted of high carbon steel for general purpose drilling. Drill bit constructed of high speed steel for fast and precise drilling. Creates 28 threads per inch. Includes 1 drill bit and 1 tap. Ideal for creating and threading fasteners holes in metal.
StainlessTown Screw / Drill / Tap & Rivet Combo Gauge
- 3) rivet gauge color red. Includes a total of 3 diffrent gauges. 2) internally threaded screw gauge color white. 1) drill bit gauge (fractional & metric) color blue. Back side is a drill & tap gauge.
Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1/4 Hex Shank Tool Kit | Imperial
- Ideal for drilling, tapping, cutting on wood, soft metal, aluminum plate, iron, etc (note it can not work well with stainless steel 304 or high hardness metal ). Complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency. Self-centering point, do not need assistant center drilling or center punching. High hardness, rustproof, solid and durable high-speed steel in quick-change 1/4″(635mm) hex shank. Back tapered beyond tap to prevent thread damage from over-drilling.
Nxtop 6pcs Combination 1/4″ Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink Hexagonal Handle Metric Taps White Diamond/Titanium Plated
- Shank dia 635mm 1/4 hex shank. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Fast replacement composite cone, uses drill edged principle. Material high speed steel. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
Wolfride 6Pcs 1/4 Hex Shank Combination Drill and Tap Bit Set Metal Deburr Countersink Drill Bit 1/8 inch-3/8 inch
- 1/4 inch hex shank, 6 sizes in one set. The material is hss 4341, high hardness, high wear resistance, high heat resistance tool steel. Suitable for fast drilling and tapping machining. Better to be used in tapping machine rather than hand electric drill. Suitable for wood, aluminum, iron and other materials with low hardness.
Greenlee Drill/Tap/Countersink, Hss, 6-32
- Designed to tap up to 10-gauge metal. Made from hardened high-speed steel vs. Deburr/countersink also provided on bit beyond back taper. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck.
Migiwata M3 x 0.5 Metric HSS 4341 Combination Drill and Tap Bit Set of 5pcs with 1/4″ Hex Shank and Self-centering Split Point for Tapping in Wood Plastic and Aluminum
- High quality hex shank to ensure strong connection to drill chuck back tapered beyond tap to prevent thread damage from over-drilling. Features wide spiral flute, which allow the chips to easily get out of the hole, preventing chip crowding and breakage of tap drill bits. Precision ground point, flutes, body, clearance, and drill diameters for the best accuracy and performance. Ideally suited for on-site tapping construction, maintenance and repair, assembly and production environments. Made from high-speed steel 4341 vs carbon steel for longer life complete hole drilling and tapping in one operation with power drill saves labor and time.
Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040
- Hss fully ground. 18 pcs/set hss tap & drill set, unc. Size of drills #36, #29, #25, #21, #7, f, 5/16″, u, 27/64″. Size of taps 6-32unc, 8-32unc, 10-24unc, 10-32unf, 1/4″-20unc, 5/16″-18unc, 3/8″-16unc, 7/16″-14unc, 1/2″-13unc.
Drill America 5 Piece NPT Pipe Tap Set (1/8″, 1/4″, 3/8″, 1/2″ and 3/4″), Plastic Pouch Case, POU Series
- Round shank with square end straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Npt pipe taps, sizes 1/4″-18 npt, 3/8″-18 npt, 1/2″-14 npt, 3/4″-14 npt carbon steel pipe taps in plastic pouch case. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
6pcs Metric Thread Tap M3-M10 Titanium Coated HSS Drill and Tap Bits 1/4″ Hex Shank Screw Taps Tool Set
- 【Function】—they are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. 【different sizes】—there are total 6 pieces of taps in different sizes from m3 to m10 that you can use for tapping various threads. 【Notice】—these taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. 【High hardness & rust resistance】—these taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. 【Spiral flute】—taps are designed with spiral flutes and the chip clearing process would be better.
IRWIN HANSON 5/16″ – 18 NC Tap and Letter G Drill Bit Set, 80235
- Includes 1 drill bit and 1 tap. Tap crafted of high carbon steel for general purpose drilling. Ideal for creating and threading fasteners holes in metal. Drill bit constructed of high speed steel for fast and precise drilling. Creates 18 threads per inch.
6 Pcs 1/4″ HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
- Metric m3x05, m4x07, m5x08, m6x1, m8x125, m10x15shank1/4 inch (635mm) hex shank. Widely use suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc notelow speed and cutting holes in materials (thickness .
DEWALT Drill Tap, UNC, 1/4-Inch (DWADT1420)
- It offers a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers. The dewalt dwadt1420 1/4″ 20 unc drill tap is designed to be used with impact drivers. It allows you to drill and tap holes in one application, and also deburr and countersink in one step.
Century Drill & Tool 95302 4-40 NC Tap and #43 Drill Combo Pack
- Tap is heat treated and tempered for file hard threads, and longer, useful life. Tap offers precision cut threads, accurately formed for consistent, exact threading. Tap designed for hand cutting applications. Drill bit made of premium grade high speed steel. Tap and drill combo pack offers correct drill size for the tap in one convenient package.
Saiper 6pcs Drill Tap Combination Bit Set (1/8”-3/8”) with 1/4″ Hex Shank, HSS 4341 Drill Tap Countersink Screw Thread Bits
- 【High speed steel material】 made of high quality hss 4341 for high hardness, rustproof, solid and durability back tapered beyond tap to prevent thread damage from over-drilling. 【Notice】 not suitable for hard metal suitable for fast drilling, tapping machining, cutting on low hardness materials such as wood, plastic, aluminum plate, iron and other soft metal (thickness of less than 3mm). 【imperial inch size】 6 sizes in one drill tap combination bit set to meet your diverse requirements with quick change 1/4″ hex shank (1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″). 【Self-centering point】 countersink tap and thread set are recommended for use on tapping machine, which provides better stability against swaying and tilting. 【Save time】 complete hole drilling, tapping, deburring and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency.
Nxtop 6Pcs Metric Thread M3-M10 Screw Tapping Tool 1/4″ Hex Shank Titanium Plated HSS Combination Drill and Tap Set
- Metric m3,m4,m5,m6,m8,m10 thread countersink screws can be tapped with this drill and tap set. M3 x 05mm pitch,m4 x 07mm pitch,m5 x 08mm pitch,m6 x 10mm pitch,m8 x 125mm pitch,m10 x 15mm pitch. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. High speed steel with titanium coating,which supports much longer service life. 1/4 inch hex shank hss drill bit & screw tap set.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
