20 Best and Coolest 10 32 Threads

 

Nylon 66 Pan Head Machine Screw Black Slotted Drive 10-32 Thread Size 1 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100) - Thread rolling screw recommended for use in metal. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Truss Head Machine Screw Zinc Plated Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 58 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 100) - May be used in combination with other components such as knurled head screws, torque thumb screws hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Rohs compliant. May be used in combination with other components such as hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Soft, low carbon steel, black oxide finish.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 14 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 05-inches thread length. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 34 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100) - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Steel Standard U-Style Clip-On Nut Plain Finish 10-32 Thread Size For 0025-0062 Material Thickness 0312 Edge Distance Pack of 25

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-32 Thread Size, For 0.025″-0.062″ Material Thickness, 0.312″ Edge Distance (Pack of 25)

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-32 Thread Size, For 0.025″-0.062″ Material Thickness, 0.312″ Edge Distance (Pack of 25) - Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and a secure hold. Plain surface has no.

 

Steel Thread Rolling Screw for Metal Zinc Plated Truss Head Phillips Drive 10-32 Thread Size 12 Length Pack of 50

Steel Thread Rolling Screw for Metal, Zinc Plated, Truss Head, Phillips Drive, #10-32 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Rolling Screw for Metal, Zinc Plated, Truss Head, Phillips Drive, #10-32 Thread Size, 1/2″ Length (Pack of 50) - Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 3 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50) - Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Designed to clip onto panels for quick alignment and a secure hold. Steel is often used in applications where strength is the primary consideration. Plain surface has no.

 

JW Winco L03-5319 CN Check Nut Steel 10-32 Thread

J.W. Winco L03-5319 CN Check Nut, Steel, 10-32 Thread

J.W. Winco L03-5319 CN Check Nut, Steel, 10-32 Thread - May be used in combination with other components such as knurled head screws, torque thumb screws hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. May be used in combination with other components such as hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Soft, low carbon steel, black oxide finish. Rohs compliant.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 10-32 Thread Size 14 Length Pack of 50

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50) - Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface.

 

Steel Thread Rolling Screw for Metal Zinc Plated Serrated Hex Washer Head 10-32 Thread Size 12 Length Pack of 50

Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 1/2″ Length (Pack of 50) - Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal.

 

Nylon 66 Thumb Screw Plain Finish White Knurled Head Flat Point Meets ASTM D4066ASTM D6779 12 Length Fully Threaded 10-32 Threads Pack of 100

Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Flat Point, Meets ASTM D4066/ASTM D6779, 1/2″ Length, Fully Threaded, #10-32 Threads (Pack of 100)

Nylon 6/6 Thumb Screw, Plain Finish, White, Knurled Head, Flat Point, Meets ASTM D4066/ASTM D6779, 1/2″ Length, Fully Threaded, #10-32 Threads (Pack of 100) - Thumb screws allow for simple “by-hand” installation. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads. Knurled head provides extra grip for manual tightening. Tools not necessary for tightening or loosening.

 

18-8 Stainless Steel Prairie Bolt Plain Finish Flange Socket Cap Head Hex Socket Drive 10-32 Thread Size 0190 Shoulder Diameter 1-18 Grip Length Made in US Pack of 1

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1) - Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Made in usa. Hex socket drive has a hexagonal slot that turns using an allen key driver. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating.

 

Steel Thread Cutting Screw Black Oxide Finish Pan Head Phillips Drive Type F 10-32 Thread Size 38 Length Pack of 100

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity.

 

Steel Thread Cutting Screw Green Zinc Plated Hex Washer Head Phillips Drive Type F 10-32 Thread Size 12 Length Pack of 50

Steel Thread Cutting Screw, Green Zinc Plated, Hex Washer Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Cutting Screw, Green Zinc Plated, Hex Washer Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 50) - Zinc plating resists corrosion and has a green reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Hex washer head has a nonserrated flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 2-14 Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 2-1/4″ Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 2-1/4″ Length, Fully Threaded, Imported (Pack of 25) - Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

Nylon 66 Pan Head Machine Screw Black 2 Phillips Drive 10-32 Thread Size 12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. .

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 T25 Star Drive 10-32 Thread Size 1-14 Length Fully Threaded Imported Pack of 50

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, T25 Star Drive, #10-32 Thread Size, 1-1/4″ Length, Fully Threaded, Imported (Pack of 50)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, T25 Star Drive, #10-32 Thread Size, 1-1/4″ Length, Fully Threaded, Imported (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

18-8 Stainless Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 1-34 Length Fully Threaded Imported Pack of 25

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1-3/4″ Length, Fully Threaded, Imported (Pack of 25)

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1-3/4″ Length, Fully Threaded, Imported (Pack of 25) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread rolling screw recommended for use in metal.

 

Nylon Thumb Nut Off-White Slotted Meets UL 94V2 Inch Class 2B 10-32 Threads 0325 OD 0425 Height Pack of 100

Nylon Thumb Nut, Off-White, Slotted, Meets UL 94V2, Inch, Class 2B #10-32 Threads, 0.325″ OD, 0.425″ Height (Pack of 100)

Nylon Thumb Nut, Off-White, Slotted, Meets UL 94V2, Inch, Class 2B #10-32 Threads, 0.325″ OD, 0.425″ Height (Pack of 100) - Ensure a lasting hold for any project. Thumb nuts are easily removed. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations. Tools not necessary for tightening or loosening. Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads.

 

Zodiac C76 10-32-Thread by 78-Inch Stainless Steel Pan Head Screw Replacement

Zodiac C76 10-32-Thread by 7/8-Inch Stainless Steel Pan Head Screw Replacement

Zodiac C76 10-32-Thread by 7/8-Inch Stainless Steel Pan Head Screw Replacement - Measures 10-32-thread by 7/8-inches. This pan head screw is compatible with zodiac polaris pool cleaner models 280, 280 tanktrax, vac-sweep 280. This product weighs 1 pounds. . Made of stainless steel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.