19 Top Drillco Drill Bits

 

Drillco Drill Bit 3 Jobber Drills Carbide Tip Bright 118° Point 3 Pack #ad

Drillco Drill Bit, 3, Jobber Drills, Carbide Tip, Bright, 118° Point (3 Pack)

Drillco Drill Bit, 3, Jobber Drills, Carbide Tip, Bright, 118° Point (3 Pack) #ad - Carbide tipped jobbers length drills are primarily for drilling cast iron cast steel bronze hard copper aluminium and hard non-ferrous materials which have a high degree of abrasiveness and which requires a sturdy drill for strength.

 

Drillco Drill Bit8-32 Combined Tap and Drill High Speed Steel Bright 2 pack #ad

Drillco Drill Bit,8-32, Combined Tap and Drill, High Speed Steel, Bright (2 pack)

Drillco Drill Bit,8-32, Combined Tap and Drill, High Speed Steel, Bright (2 pack) #ad - The drill part of the tool produces a hole correctly sized for approximately 75% of thread they can be used on multi-spindle or hand held drill operations. Combined tap and drill. Sizes machine screw material high speed steel finish/coating bright cat taps. Length of thread 075. Nc 32.

 

Drillco Drill Bit 47 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 5 Pack #ad

Drillco Drill Bit, 47, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack)

Drillco Drill Bit, 47, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack) #ad - Flute length13/4. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Solid carbide drill. Sizes number material solid carbide finish/coating bright cat drills.

 

Drillco Drill Bit 1116x6 Wood Drills Paddle Bits  16 Pack #ad

Drillco Drill Bit, 11/16×6, Wood Drills (Paddle Bits) ( 16 Pack)

Drillco Drill Bit, 11/16×6, Wood Drills (Paddle Bits) ( 16 Pack) #ad - Wood drills. Wood drills paddle bits. Sizes fractional material high speed steel finish/coating bright cat drills.

 

Drillco Drill Bit 51 Cobalt Jobber Drills Cobalt Gold 135° Point 32 Pack #ad

Drillco Drill Bit, 51, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (32 Pack)

Drillco Drill Bit, 51, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (32 Pack) #ad - Heavy duty construction made to type j aircraft specifications. Ëœ Used for drilling holes in hard tough materials such as stainless steel titanium high temperature and high strength alloys.

 

Drillco Drill Bit 138 12 Shank Cobalt S&D Drills Cobalt Gold 135° Point #ad

Drillco Drill Bit, 1.3/8, 1/2″ Shank Cobalt S&D Drills, Cobalt, Gold, 135° Point

Drillco Drill Bit, 1.3/8, 1/2″ Shank Cobalt S&D Drills, Cobalt, Gold, 135° Point #ad - Sizes fractional material cobalt finish/coating bronze cat drills. The 135 degree split point reduces thrust and eliminates walking at the drill point. Precision ground for high degree of concentricity between shank and body diameter. 1/2″ shank cobalt s&d drills. Ideal for drilling in toughhigh tensile strength materials.

 

Drillco Drill Bit 53 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 5 Pack #ad

Drillco Drill Bit, 53, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack)

Drillco Drill Bit, 53, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack) #ad - Sizes number material solid carbide finish/coating bright cat drills. Solid carbide drill. Flute length11/2. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy.

 

Drillco Drill Bit 1364 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 2 Pack #ad

Drillco Drill Bit, 13/64, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (2 Pack)

Drillco Drill Bit, 13/64, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (2 Pack) #ad - Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Sizes fractional material solid carbide finish/coating bright cat drills. Solid carbide drill. Flute length3.

 

Drillco Drill Bit 1716 12 Shank S&D Drills High Speed Steel Bright Black 118° Point #ad

Drillco Drill Bit, 1.7/16, 1/2″ Shank S&D Drills, High Speed Steel, Bright & Black, 118° Point

Drillco Drill Bit, 1.7/16, 1/2″ Shank S&D Drills, High Speed Steel, Bright & Black, 118° Point #ad - Ideal for drilling low and medium tensil strength materials. Sizes fractional material high speed steel finish/coating bright & black cat drills. Common flute and overall length for minimal adjustment during tool changes. Precision ground for a high degree of concentricity between shank and body diameter. 1/2″ shank s&d drills.

 

Drillco Drill Bit 28 Cobalt Jobber Drills Cobalt Gold 135° Point 24 Pack #ad

Drillco Drill Bit, 28, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (24 Pack)

Drillco Drill Bit, 28, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (24 Pack) #ad - . Ëœ Used for drilling holes in hard tough materials such as stainless steel titanium high temperature and high strength alloys. Heavy duty construction made to type j aircraft specifications.

 

Drillco Drill Bit 23 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 3 Pack #ad

Drillco Drill Bit, 23, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack)

Drillco Drill Bit, 23, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack) #ad - Solid carbide drill. Flute length21/2. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Sizes number material solid carbide finish/coating bright cat drills.

 

Drillco Drill Bit 2964 Extra Length Drills High Speed Steel Black Oxide 118° Point 8 Pack #ad

Drillco Drill Bit, 29/64, Extra Length Drills, High Speed Steel, Black Oxide, 118° Point (8 Pack)

Drillco Drill Bit, 29/64, Extra Length Drills, High Speed Steel, Black Oxide, 118° Point (8 Pack) #ad - Flute length9. Because of the inaccessibility or the extreme depth of a hole it is found that even long series drillsare not long enough the drilling of such holes generally requires the use of an extra length drill. For extra length drills. 12″” oal”. The drillsare made with a general purpose flute design which will perform satisfactorily under the widest range of operating conditions and materials.

 

Drillco Drill Bit 19 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 3 Pack #ad

Drillco Drill Bit, 19, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack)

Drillco Drill Bit, 19, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack) #ad - Sizes number material solid carbide finish/coating bright cat drills. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Solid carbide drill. Flute length23/4.

 

Drillco Drill Bit 57 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 5 Pack #ad

Drillco Drill Bit, 57, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack)

Drillco Drill Bit, 57, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (5 Pack) #ad - Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Solid carbide drill. Sizes number material solid carbide finish/coating bright cat drills. Flute length11/2.

 

Drillco Drill Bit 23 Cobalt Jobber Drills Cobalt Gold 135° Point 21 Pack #ad

Drillco Drill Bit, 23, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (21 Pack)

Drillco Drill Bit, 23, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (21 Pack) #ad - . Heavy duty construction made to type j aircraft specifications. Ëœ used for drilling holes in hard tough materials such as stainless steel titanium high temperature and high strength alloys.

 

Drillco Drill Bit 964 Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 3 Pack #ad

Drillco Drill Bit, 9/64, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack)

Drillco Drill Bit, 9/64, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (3 Pack) #ad - Sizes fractional material solid carbide finish/coating bright cat drills. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Flute length21/2. Solid carbide drill.

 

Drillco Drill Bit H Solid Carbide Jobber Length Drills Solid Carbide Bright 118° Point 2 Pack #ad

Drillco Drill Bit, H, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (2 Pack)

Drillco Drill Bit, H, Solid Carbide Jobber Length Drills, Solid Carbide, Bright, 118° Point (2 Pack) #ad - Flute length31/2. Sizes letter material solid carbide finish/coating bright cat drills. Their excellent abrasion-resistant qualities make them advantageous for use in drilling abrasive materials such as cast iron non-ferrous alloys high silicon aluminum hard rubber and plexiglass carbide drills are run at higher speeds than standard high speed steel drills they offer the advantage of extreme rigidity for greater drilling accuracy. Solid carbide drill.

 

Drillco Drill Bit 25 Jobber Drills Carbide Tip Bright 118° Point 3 Pack #ad

Drillco Drill Bit, 25, Jobber Drills, Carbide Tip, Bright, 118° Point (3 Pack)

Drillco Drill Bit, 25, Jobber Drills, Carbide Tip, Bright, 118° Point (3 Pack) #ad - Carbide tipped jobbers length drills are primarily for drilling cast iron cast steel bronze hard copper aluminium and hard non-ferrous materials which have a high degree of abrasiveness and which requires a sturdy drill for strength.

 

Drillco Drill Bit 21 Cobalt Jobber Drills Cobalt Gold 135° Point 21 Pack #ad

Drillco Drill Bit, 21, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (21 Pack)

Drillco Drill Bit, 21, Cobalt Jobber Drills, Cobalt, Gold, 135° Point (21 Pack) #ad - . Ëœ Used for drilling holes in hard tough materials such as stainless steel titanium high temperature and high strength alloys. Heavy duty construction made to type j aircraft specifications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.