18 Top Chicago Pneumatics

 

Chicago Pneumatic CP870 Dual Action Sander - 1 inches. 147-cp870 features -power regulator for precise control. Product type -orbital sander. 5 inches. -Lock off throttle to prevent accidental start ups. Dimensions overall height, top to bottom -4. -Dual action sander. 25 lbs. Overall width, side to side -6. -Insulated grip provides comfort to operator. Pad size -5″, 8″. 5 inches. Overall product weight -4. 7 pounds. Overall depth, front to back -10. Generic dimensions -excellent for blending and smoothing filler, feather edging and pre-paint preparationpad size diameter 6″ free speed 10,000 rpm average air consumption 8 cfm air inlet thread 1/4″ nptf minimum hose size 3/8″ sound dba 85 weight 4.

 

Chicago Pneumatic Tool CP7769 Heavy Duty 3/4-Inch Impact Wrench with Light Weight Composite Housing - This tool will impress. Lightweight with composite handle/motor housing and magnesium clutch housing. The chicago pneumatic cp7769 3/4″ heavy duty lightweight composite impact wrench with s2s (side to side forward / reverse) technology. Low air consumption air motor. Great power at 1440 maximum torque in reverse.

 

Chicago Pneumatic CP7120 Needle Scaler - Chicago pneumatic cp7120 needle scaler. Wear resistant needles 19 needles made of 1/8″ high wear resistant steel. Chicago pneumatic cp7120 needle scaler featureswith 4,600 blows per minute, adjustable sleeve for job specific requirements, and high wear resistant steel needles, this is a dependable tool for all your surface preparation needs. Needle scaler for all your surface preparation needsspeed 4,600 blows per minute for highly efficient work. Adjustability sleeve adjusts for needle protrusion in tune with application needs. This tool can easily convert from a needle scaler to a chisel scaler. Great features, durability, flexibility, and power to clean.

 

Chicago Pneumatic CP7748-2 1/2-Inch High Torque Impact Wrench, Heavy Duty, Composite Housing with 2-Inch Extended Anvil - The chicago pneumatic cp7748-2 is the best extended anvil tool on the market today. The composite housing with aluminum back cap support along with a thermo-plastic rubber injected grip makes the tool super durable and comfortable. Quiet handle exhaust, twin hammer mechanism, full teasing ergonomically developed trigger, swivel air inlet, free speed 8,200, working torque 75-580, max torque 922 ft lbs, super great value. The air motor design holds up in dirty envirnoments better than all other composite competitors. It is designed for high volume tire shops and fleets. 9 lbs. This tool is extremely strong with over 1200 foot pounds of nut loosening power and weighs just 4.

 

Chicago Pneumatic CP9361-1 Industrial Scribe and Engraving Kit - Adjustable power for all types of applications and convertible to a hammer or light scaler and comes included with a 8-foot hose with air filter the chicago pneumatic cp9361-1 industrial air scribe and engraving kit can be used for all types of applications and can be used with metals, plastics, ceramics, and glass. .

 

Chicago Pneumatic CP828H 1/2-Inch Drive Heavy Duty Air Ratchet - -Lbs. Specificationsworking torque 10-50 ft. -Lb. Chicago pneumatic cp828-h 1/2″ heavy duty ratchet. 4 lbs. Chicago pneumatic cp828-h 1/2″ heavy duty ratchet featuresadvanced head design provides dramatically longer life. Applications exhaust systems, small engines, water pumps, fuel pumps, radiators, etc. Ergonomic square-handle design for a positive, comfortable grip. Efficient 1/2 hp motor provides up to 50 ft. Maximum torque 50 ft. Of torque. Ultimate torque by hand 125 ft. 5length 10″weight 2. Teasing throttle for precise speed control. Free speed 150 rpmaverage air consumption 3. /Lbs. /Lbs. 75 cfmair inlet thread 1/4″ nptfminimum hose size 3/8″sound dba 96.

 

Chicago Pneumatic CP7722 3/8-Inch Heavy Duty Air Impact Wrench - Overall product weight -2 pounds. -rocking dog clutch for smooth operation and extreme durability. Overall width, side to side -4 inches. -Easy maneuvering with 360 degree swivel air inlet. Overall depth, front to back -8 inches. -Built in regulator for controlled torque. Cpt7722 features -90 ft. Square drive size -3/8″. Of ultimate torque. Max torque (ft-lb) -0, 199 ft-lb. Dimensions overall height, top to bottom -3 inches. /Lbs. Anvil length -standard anvil.

 

Chicago Pneumatic CP860 Heavy Duty Air Die Grinder - Rugged, energy-efficient 1/2 hp motor. Cp classic tool- now comes with 2 year warranty. Built-in regulator matches speed to job. Rear exhaust directs air away from work. Square handle design for positive grip.

 

Chicago Pneumatic CP879 3/8-Inch Chuck Air Reversible Angle Drill - Reverse valve for easy directional changes. Ideal for screwdriving, drilling in hard to reach areas. Rear exhaust directs air away from the work piece. Compact, low profile head for drilling in confined areas. Teasing throttle for control from startup through run down.

 

Chicago Pneumatic CP9108Q-B Heavy Duty Angle Die Grinder - Easy access speed regulator with a compact and ergonomic grip offers high operator comfort. 1-year parts and labor warranty. Low noise level, 81 db(a). Efficient and powerful 032 hp (240w) motor, at 25,000 rpm free speed. Excellent tool for general maintenance applications, 120 degree angle.

 

Chicago Pneumatic CP9790 Pistol Style, Keyed Chuck 3/8-Inch Heavy Duty Reversible Drill - Chicago pneumatic air drills have set the standard for quality drilling the past 50 years. 1 lbs. 0 cfm average air consumption, 24 cfm under load, overall length 6. 3/8 chuck capacity, 6. The cp9790 is a 3/8-inch heavy duty pistol drill with a. 5 -inch, net weight 3. The handle has an ergomomic grip included which definitely maximizes operator comfort. 37 horepower motor, the tool comes with an industrial qualitry jacobs 3/8-inch chuck and the rpm is a fast 2,000 rpm’s.

 

Chicago Pneumatic CP2755 Pistol Grip Screwdriver with Direct Drive - 2. 3 cfm under load, 2. The chicago pneumatic cp2755 pistol grip screwdriver with direct drive has a 1/4 female quick change chuck and is perfect for holding 1/4 inch bits or any 1/4 shank accessories like cp’s new stud cleaners. 3 net weight, part number 6151922755. Reversible control at the trigger, ergonomic comfort grip on the handle, excellent for soft draw rundowns like screws. 200 rpm, 124 inch lbs, 2. 5 cfm average air consumption, 6.

 

ExpertPower® 18v 2000mAh NiCd Battery for Milwaukee 48-11-2230 48-11-2200 48-11-2232 Chicago Pneumatic 8940158631 - Products trademarked expertpower® are marketed and sold exclusively by expertpower. 1 year warranty. Expertpower® ships within 1 business day delivery typically takes 1-3 business days. Expertpower® products are tested to match and/or exceed oem specs. Brand new // ni-cd // 18 volts // 2000 mah // black.

 

Chicago Pneumatic A046074 7-Inch Straight Punch Chisel - 00401-inch round style. Professional’s choice. Affordable. Excellent quality air hammer chisel.

 

Chicago Pneumatic CP9885 Air Caulking Gun - Easy to handle. Trigger controlled material flow. Accepts standard cartridges 2″ x 8-1/2″. Labor time savings.

 

Chicago Pneumatic CP875 1/4-Inch 90 Degree Angled Air Die Grinder - ) 1/4, variable speed yes, speed (rpm) 22,500, air inlet size (in. Npt) 1/4, air consumption (cfm) 5. ) 4 7/8, min. Collet size (in. 5, side handle no, tool length (in. ) 3/8, cfm at load 22, tool weight (lbs. ) 1. Hose size (in. This chicago pneumatic mini angle die grinder boasts a compact, lightweight design for easy maneuverability and a 90deg angle head for flexibility in confined areas.

 

Chicago Pneumatic 8940158924 Air Chisel Quick Change Retainer for .401 Shank - Economical. 401 shank.

 

Chicago Pneumatic CP717 Super Duty Air Hammer - -Positive action trigger for precise control.   Stroke 2. 75 lb. Specifications -1,800 blows per minute. 69″ average air consumption 3. 498″ diameter chisel shank to handle the extra powerapplications front end work, king pin removal, removal and installation of bulldozer walking beams, removal of truck springs and heavy-duty spring bushings. 75″ weight 4. Cpt717 features -most powerful cp air hammer for automotive, truck and off road equipment. Warranty -1 yr warranty on material and workmanship. -Super duty air hammer. 13 cfm air inlet thread 1/4″ nptf minimum hose size 3/8″ sound dba 95 length 9. . Dimensions -.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.