MK Diamond 158585 Replacement Drum with 18 Point Steel Sharp Tooth for SG-9 and SG-5 Series MK Diamond Scarifier
- Scarifier drums come in a variety of cutter combinations to provide different speeds, removal rates and profiles. Drum weighs 30 pounds. 18 point steel sharp tooth cutter for lightly scarify, clean surfaces, removal of traffic lines or coatings.
5 pt Carbide Flail Cutter (1.73″ OD x 0.63″ ID x 0.24″ W) – Scarifier Accessories and Consumables (50 pcs)
- They also work great to remove traffic lines, pavement markings, epoxy, paint, and waterproofing membranes. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Altcut’s carbide flail scarifier cutters are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with many of the most popular scarifier/concrete planer machines, such as airtec®, bartell®, blastrac®, diteq®, edco®, kut-rite®, sase®, smith mfg®, and von arx®. . Note all sizes and dimensions are approximate. Many other scarifier accessories available upon request to our customer service department.
6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-4®/CPM-8® Edger Scarifier/Planer – Fine Setup
- 114 pcs of hardened steel spacers with 12 extra spacers free (126 total spacers). 6 pcs of 1/2″ hardened steel shafts. 54 pcs of 6 point 1-3/4″ carbide flail cutters. Includes long lasting cutters, shafts, and spacers. Replacement kit designed for edco® cpm-4®/cpm-8® edger scarifier/planer.
Kraft Tool Plaster and Stucco Scarifier 8-inch Pro Form Handle
- Used to easily scratch undercoats so finish coat will bond and not separate. . All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles.
Scarifier for Concrete and Asphalt with Honda Engine 9 HP
- Dimensions w x l x h (in) 20 x 36 x 33 engine make / model honda gx270 engine power (hp) 9 hp engine type air-cooled single-cylinder four-cycle engine rpm 3600 start method recoil fuel gasoline fuel consumption us gal/h 0. The scarifier sc-9 is used to prepare and repair the concrete and asphalt floors. 71 fuel capacity (qt) 5. It also has variable speed control and regulation in the depth of cut. Included vacuum port equipped. It is applied to the following services pinking the floor to receive new flooring, create non-slip furrows, remove traffic lanes and clean surfaces of floors in general. 4 working width (in) 9 depth of cut per pass (in) 1/8 surface capacity scarification (ft²/h) depending on soil & environmental factors 350-500 traffic line removal capacity (ft²/h) depending on soil & environmental factors 800 power transmission from drive motor via centrifugal clutch and v-belt direct to axis. The scarifier has a robust chassis, which increases the equipment life and reduces the level of vibration, bringing to the operator more comfort during the job.
Bon 83-135 12-Inch Plaster Scarifier with Plastic Handle
- This tool makes scratching undercoat easy. Bon’s plaster scarifier is made with a spring steel blade and a plastic handle. .
8 pt Carbide Flail Cutter Complete Drum Kit for Sase® SC10E® Scarifier/Planer – General Setup
- Note all sizes and dimensions are approximate. Many other scarifier accessories and configurations available upon request to our customer service department. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the sase® sc10e® scarifier/planer. . Fully assembled and ready for use. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes.
6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-8® Scarifier/Concrete Planer – Fine Setup
- Drum and bushings sold separately. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Note all sizes and dimensions are approximate. Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the edco® cpm-8® scarifier/concrete planer. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Many other scarifier accessories available upon request to our customer service department.
6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-4®/CPM-8® Edger Scarifier/Planer – General Setup
- 6 pcs of 1/2″ hardened steel shafts. 138 pcs of hardened steel spacers with 12 extra spacers free (150 total spacers). 42 pcs of 6 point 1-3/4″ carbide flail cutters. Replacement kit designed for edco® cpm-4®/cpm-8® edger scarifier/planer. Includes long lasting cutters, shafts, and spacers.
MK Diamond 158575 Hardened Steel Spacer for Scarifier Drum Assembly
- . Mk diamond 158575 hardened steel spacer is for scarified drum assembly. It is a replaceable part and a part to an accessory.
Tomahawk Power MC8-4 Gas 8″ Concrete Scarifier Planer Grinder 5.5 HP Honda Engine
- (350, 500 sq. 5 hp (4. The tomahawk tmc8-4 gas scarifier is perfect for sidewalk trip hazard repair, floor cleaning and preparation, as well as, concrete, coating, traffic line, and marking removal. Per hour of concrete surface at a depth per pass of 1/8 in. 0kw) • working width 8 in. • Warranty 1 year warranty • blades sold separately product applications • surface and marking removal • surface leveling • surface texturing and grooving • cleaning and texturing of concrete and asphalt • concrete reduction and scabbing • removal of roof chippings • grooving applications • cleaning concrete form-work and shuttering • non-slip finishes • removal of concrete and plaster droppings. Per hour) • depth 1/8 in. Ft. Powered by an incredible 5. Specifications • engine honda gx160 • power 5. Per pass • weight 135 lbs. 5 hp honda engine, easily scarify, level, and smooth approximately 350-500 sq. Ft.
5 pt Carbide Flail Cutter Consumables Kit for Kut-Rite® KR8® Scarifier/Planer – Fine Setup
- Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Drum sold separately. Many other scarifier accessories available upon request to our customer service department. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the kut-rite® kr8® scarifier/planer. Note all sizes and dimensions are approximate.
Kraft Tool Plaster and Stucco Scarifier 12-inch Pro Form Handle
- . Used to easily scratch undercoats so finish coat will bond and not separate. All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles.
Kraft Tool Plaster and Stucco Scarifier 16-inch Pro Form Handle
- All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. Used to easily scratch undercoats so finish coat will bond and not separate. .
8 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-10® 6 Shaft Scarifier/Concrete Planer – General Setup
- 102 pcs of 8 point 2-1/4″ carbide flail cutters. 252 pcs of hardened steel spacers with 12 extra spacers free (264 total spacers). 6 pcs of 5/8″ hardened steel shafts. Replacement kit designed for edco® cpm-10® 6 shaft scarifier/concrete planer. Includes long lasting cutters, shafts, and spacers.
MK Diamond 158495 12 Point Blunt Tooth Steel Wheel for Scarifier Drum Assembly
- Maximum cutting rate is 1/16″ per pass. Average life of 500 to 800 square feet. Replacement teeth for mk diamond scarifier drums. 12 teeth cutter, flat tip. General purpose- removal of concrete or asphalt. Used for paint and oil removal, traffic and shop floor safety-line removal, cleaning and concrete preparation. 12 tooth, hardened steel (2″ od by 9/16″ id). For scarified drum assembly.
Marshalltown Scarifier 8 by Marshalltown
- Fan-shaped steel rake head. Marshalltown scarifier 8. Red, metal rake head. Head-to-handle connection has a bolted design.
Bon 13-192 14-Inch Spring Steel Scarifier, 3-Inch Tines
- . Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat. Available in several size options.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
