17 Top Carbide Tipped Hole Saws

 

MAGBIT 6255816 MAG625 3-58-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - Use standard or sds shank arbors. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Works in rotary and sds hammer mode, works forward and reverse. 1-3/8-inch depth. Drilling a hole through concrete block takes less than 7 seconds.

 

Starrett CT414 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw Carbide Teeth 4-14 Diameter 1-58 Cutting Depth 58-18 Thread Black

Starrett CT414 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw, Carbide Teeth, 4-1/4″ Diameter, 1-5/8″ Cutting Depth, 5/8″-18 Thread, Black

Starrett CT414 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw, Carbide Teeth, 4-1/4″ Diameter, 1-5/8″ Cutting Depth, 5/8″-18 Thread, Black - 1-5/8-inches cutting depth. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools.

 

MAGBIT 6252016 MAG625 1-14-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 625.2016 MAG625 1-1/4-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 625.2016 MAG625 1-1/4-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - Use standard or sds shank arbors. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. 1-3/8-inch depth. Drilling a hole through concrete block takes less than 7 seconds. Works in rotary and sds hammer mode, works forward and reverse.

 

Bosch HTW1 1-Inch Thin Wall Impact Tough Carbide Tipped Hole Saw

Bosch HTW1 1-Inch Thin Wall Impact Tough Carbide Tipped Hole Saw

Bosch HTW1 1-Inch Thin Wall Impact Tough Carbide Tipped Hole Saw - The thin-wall hole saws provide clean, fast cutting even in impact mode. Bosch impact tough bit takes the impact and completes the job. Bosch has engineered the impact tough bits to handle torque-generated from today’s high-powered impact drivers. .

 

Lenox Tools 3021616CT 16 Carbide Tipped Holesaw 1-Inch or 25mm

Lenox Tools 3021616CT 16 Carbide Tipped Holesaw, 1-Inch or 25mm

Lenox Tools 3021616CT 16 Carbide Tipped Holesaw, 1-Inch or 25mm - Added durability-thick backing plate resists damage and increases life. Lenox 16ct specificationsdiameter (inches) 1″pipe tap (inches) -pipe entrance (inches) -use arbor number 1l or 4llenox 16ct features long tool life-heat resistant carbide teeth for long life in tile and stainless steel. . Use standard arbor note we recommend the use of a carbide tipped pilot drill when cuttingceramic wall tile. Unique tooth configuration-engineered design provides ability to cut in stainless steel like no other.

 

Inton 16mm-50mm Tungsten Carbide Steel Tipped Drill Bit TCT Metal Cutter Hole Saw Set of 10

Inton 16mm-50mm Tungsten Carbide Steel Tipped Drill Bit TCT Metal Cutter Hole Saw Set of 10

Inton 16mm-50mm Tungsten Carbide Steel Tipped Drill Bit TCT Metal Cutter Hole Saw Set of 10 - 79″total length 94mm / 3. 7″ material carbidemain color gray package content 10 x tct hole saw. 4″hole saw diameter 16 18 20 22 25 26 28 30 40 50mm drill bit depth 35mm / 1. 38″hole saw depth 20mm / 0. Product name hole sawused for metal hole cutterdesign twist drill bit , triangle shank drill diameter 6mm / 0. 24″shank diameter 10mm / 0.

 

MK Morse Hole Saw AT20  1-14-Inch Diameter Carbide Tipped

MK Morse Hole Saw AT20 1-1/4-Inch Diameter Carbide Tipped

MK Morse Hole Saw AT20 1-1/4-Inch Diameter Carbide Tipped - Ground and set teeth to help cut materials that bi-metal saws will not cut. Tungsten carbide tooth tips offer the highest wear resistance possible and longer life cutting abrasive materials. 3 teeth per inch creates wider gullet for better chip clearance and faster cutting. Maximum cutting depth 1-1/2-inch. 1 hole saw per box.

 

MAGBIT 6251816 MAG625 1-18-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 625.1816 MAG625 1-1/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 625.1816 MAG625 1-1/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - 1-3/8-inch depth. Use standard or sds shank arbors. Drilling a hole through concrete block takes less than 7 seconds. Works in rotary and sds hammer mode, works forward and reverse. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.

 

Lenox Tools 3022222CT 22 Carbide Tipped Holesaw 1-38-Inch or 35mm

Lenox Tools 3022222CT 22 Carbide Tipped Holesaw, 1-3/8-Inch or 35mm

Lenox Tools 3022222CT 22 Carbide Tipped Holesaw, 1-3/8-Inch or 35mm - The variable tooth set and height ensure that each tooth works independently, with super efficiencey. Lenox 22ct specifications tooth hardness ra 90, 93 6, 7 degree positive rake 3 teeth per inch 1 1/3 hole diameter use arbor number 2l pilot bit 1″ pipe entrance lenox 22ct featureslenox’s unique tooth shape evenly distributes the cutting force over a wider area of the tooth. They will cut faster and cleaner and last longer than other hole saws. This means that lenox hole saws are virtually indestructable.

 

MAGBIT 6261616 MAG626 1-Inch Tungsten Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 626.1616 MAG626 1-Inch Tungsten Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 626.1616 MAG626 1-Inch Tungsten Carbide Tipped Holesaw with 1-9/16-Inch Depth - Cuts up to 3/16-inch deep. Auto ejecting slug. 3/8-inch depth. Cuts sheet metal, stainless steel, iron , cast iron, copper, abrasive materials, such as high density resin and metal plate. Over 300 holes in stainless steel plate.

 

MAGBIT 6256616 MAG625 4-18-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 625.6616 MAG625 4-1/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 625.6616 MAG625 4-1/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - 1-3/8-inch depth. Works in rotary and sds hammer mode, works forward and reverse. Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Use standard or sds shank arbors.

 

MAGBIT 6283016 MAG628 1-78-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 628.3016 MAG628 1-7/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 628.3016 MAG628 1-7/8-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - Deep gullet design for improved chip removal. 1-3/4-inch depth. Tough 3/16-inch thick back plate. Faster cutting and more holes per saw. Cuts through 2-inchx4-inch in one easy pass.

 

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set 9-Piece

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece) - 9 piece value set includes (1) 2 in carbide tipped hole saw, (1) 1-1/2 in bi-metal hole saw, (1) 1-1/8 in bi-metal hole saw, (1) 7/8 in hole saw, (1) 3/4 in hole saw, (1) snaplock plus mandrel, (1) pilot bit, (1) 5/8 in threaded adaptor (fits diameters 1-1/4 in to 6 in) and (1) 1/2 in threaded adaptor (fits diameters 9/16 in to 3-1/16 in). 2 in carbide tipped hole saw provides 20x faster material removal in wood and metal, 10x faster material removal in hardened materials and 3x more holes per charge. Variable tooth design provides faster cuts with less vibration, drills wood, plastic, aluminum, metal and stainless steel. Snaplock plus mandrel system for a quick and easy change with no down time. Works with any brand of hole saw with included adapter nuts.

 

Starrett CT412 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw Carbide Teeth 4-12 Diameter 1-58 Cutting Depth 58-18 Thread Black

Starrett CT412 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw, Carbide Teeth, 4-1/2″ Diameter, 1-5/8″ Cutting Depth, 5/8″-18 Thread, Black

Starrett CT412 Steel High Performance Triple Chip Tungsten Carbide Tipped Hole Saw, Carbide Teeth, 4-1/2″ Diameter, 1-5/8″ Cutting Depth, 5/8″-18 Thread, Black - 1-5/8-inches cutting depth. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass.

 

MAGBIT 6286816 MAG628 4-14-Inch Carbide Tipped Holesaw with 1-916-Inch Depth

MAGBIT 628.6816 MAG628 4-1/4-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth

MAGBIT 628.6816 MAG628 4-1/4-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth - Deep gullet design for improved chip removal. 1-3/4-inch depth. Cuts through 2-inchx4-inch in one easy pass. Faster cutting and more holes per saw. Tough 3/16-inch thick back plate.

 

Lenox Tools 3022626CT 26 Carbide Tipped Holesaw 1-58-Inch or 41mm

Lenox Tools 3022626CT 26 Carbide Tipped Holesaw, 1-5/8-Inch or 41mm

Lenox Tools 3022626CT 26 Carbide Tipped Holesaw, 1-5/8-Inch or 41mm - Thick backing plate for added durability. Uses standard arbors. Heat resistant carbide teeth for longer life. Unique tooth configuration for cutting stainless steel.

 

Lenox Tools 3021212CT Carbide Tipped Holesaw-12CT 34-Inch or 19mm

Lenox Tools 3021212CT Carbide Tipped Holesaw-12CT, 3/4-Inch or 19mm

Lenox Tools 3021212CT Carbide Tipped Holesaw-12CT, 3/4-Inch or 19mm - Unique tooth configuration for cutting stainless steel. Thick backing plate for added durability. Uses standard arbors. Heat resistant carbide teeth for longer life.