17 Coolest Raised Panel Cutters in 2020

 

Freud UC-202 Bevel Raised Panel Shaper Cutter For 58-Inch Stock - 34 Bore

Freud UC-202 Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock – 3/4 Bore

Freud UC-202 Bevel Raised Panel Shaper Cutter For 5/8-Inch Stock – 3/4 Bore - All 3/4″ bore cutters can be used with back-cutters uc230 and uc231 when using with 3/4″ stock. These quadra-cut raised panel cutters are designed for 5/8″ thick panels. All 1-1/4″ bore cutters can be used with back-cutters up230 and up231 when using 3/4″ stock.

 

Woodtek 954125 10-pack Router Bits Door Construction Raised Panel Backcutters 2 Piece Raised Panel Cutter 12 Shank

Woodtek 954125, 10-pack, Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank

Woodtek 954125, 10-pack, Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank - The two-piece cove raised panel set with vertical panel bit is available for horizontal or vertical use as best suits your operation, use with table-mounted portable routers micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Imported. Cnc-machining to +/-0. Positive shear angle places less demand upon your routing equipment. Rugged ptfe (polytetrafluoroethylene) briteview™ bright yellow coating not only protects but provides better visibility for safer operations. Using the reversible woodtek carbide-tipped two-piece cove raised panel door set you can make perfect matching ogee stiles and rails for custom doors. Manufactured in facilities meeting stringent iso 90012008 quality assurance standards. 1/2″ shanks. Make classic raised panel doors on a router table.

 

Freud UC-208 Quadra-Cut Raised Panel Cutter for 58-Inch Stock

Freud UC-208 Quadra-Cut Raised Panel Cutter for 5/8-Inch Stock

Freud UC-208 Quadra-Cut Raised Panel Cutter for 5/8-Inch Stock - All 1-1/4″ bore cutters can be used with back-cutters up230 and up231 when using3/4″ stock. These quadra-cut raised panel cutters are designed for 5/8″thick panels. All 3/4″ bore cutters can be used with back-cutters uc230 and uc231 when using with3/4″ stock.

 

Freud RP-B34 34-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-B34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-B34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Back cutter allow use of panel cutters on 3/4″ stock. Covered by freud’s limited lifetime warranty.

 

Freud UP200 Raised Panel Shaper Cutter For 58-Inch Stock 1-14 Bore

Freud UP200 Raised Panel Shaper Cutter For 5/8-Inch Stock, 1-1/4 Bore

Freud UP200 Raised Panel Shaper Cutter For 5/8-Inch Stock, 1-1/4 Bore - Kickback reducing design. Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips.

 

Woodtek 954125 Router Bits Door Construction Raised Panel Backcutters 2 Piece Raised Panel Cutter 12 Shank

Woodtek 954125, Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank

Woodtek 954125, Router Bits, Door Construction, Raised Panel & Backcutters, 2 Piece Raised Panel Cutter, 1/2″ Shank - -The result is a highly durable bit that can be utilized for the most rigorous industrial applications. -Manufactured using solid hardened steel and c3 micro grain carbide. -Anti-kickback design. -precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. Make classic raised panel doors on a router table.

 

Freud UC-209 22 Raised Panel Shaper Cutter For 34-Inch Stock - 34 Bore

Freud UC-209 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore

Freud UC-209 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore - Two main wings form the majority of the profile while two smaller cutters with a negative shear angle smooth the vertical part of the profile to eliminate fuzzing. 4-15/16 inch diameter, 43/64-inch carbide height. Covered by freud’s limited lifetime warranty. These cutters form a 1/4-inch tongue in 3/4-inch stock. Freud’s exclusive 2+2 raised panel cutters produce raised panels that are glass smooth, even on cross grains, and never have the bothersome fine splinters at the top edge of the profile.

 

CMT 69401331 Professional Raised Panel Cutter Head 7-1364-Inch Diameter 1-14-Inch Bore

CMT 694.013.31 Professional Raised Panel Cutter Head, 7-13/64-Inch Diameter, 1-1/4-Inch Bore

CMT 694.013.31 Professional Raised Panel Cutter Head, 7-13/64-Inch Diameter, 1-1/4-Inch Bore - Make your classic raised panels on furniture, interior/cabinet doors in solid wood & wooden boards. Heavy duty aircraft aluminum body, 2 solid carbide knives (40x245x2mm). 2 solid carbide knives type a (198x119x15mm), 2 solid carbide knives type b (60x119x15mm). Excellent results in most materials but ideal for hard wood, soft wood and wooden veneer board. Rpm between 4100 and 7000.

 

Freud RP-A 58-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-A 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-A 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Back cutter allow use of panel cutters on 3/4″ stock. All 1-1/4″ bore cutters can be used with back cutters up230 and up231 when using 3/4″ stock.

 

Freud RP-D 58-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-D 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-D 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty.

 

Freud UC-212 22 Raised Panel Shaper Cutter For 34-Inch Stock - 34 Bore

Freud UC-212 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore

Freud UC-212 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore - The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel, even on cross grain. These quadra-cut raised panel cutters are designed for 3/4″ thick panels.

 

Freud UC-207 Quadra-Cut Raised Panel Cutter for 58-Inch Stock

Freud UC-207 Quadra-Cut Raised Panel Cutter for 5/8-Inch Stock

Freud UC-207 Quadra-Cut Raised Panel Cutter for 5/8-Inch Stock - All 3/4″ bore cutters can be used with back-cutters uc230 and uc231 when using with 3/4″ stock. All 1-1/4″ bore cutters can be used with back-cutters up230 and up231 when using 3/4″ stock. These quadra-cut raised panel cutters are designed for 5/8″ thick panels.

 

Freud RP-A34 34-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-A34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-A34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips. Anti-kickback design.

 

Freud RP-E 58-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter

Freud RP-E 5/8-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter - Anti-kickback design. Covered by freud’s limited lifetime warranty. Thick micrograin carbide tips.

 

Freud UC-201 4-1516 x 1-14 22 Raised Panel Cutter Router Bit For 58 Stock

Freud UC-201 4-15/16″ x 1-1/4″ 2+2 Raised Panel Cutter Router Bit For 5/8″ Stock

Freud UC-201 4-15/16″ x 1-1/4″ 2+2 Raised Panel Cutter Router Bit For 5/8″ Stock - All 3/4″ bore cutters can be used with back cutters uc230 and uc231 when using 3/4″ stock. Thick micro grain carbide tips. All 1-1/4″ bore cutters can be used with back cutters up230 and up231 when using 3/4″ stock.

 

Freud UC-223 Quadra-Cut Raised Panel Cutter for 34-Inch Stock

Freud UC-223 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock

Freud UC-223 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock - These quadra-cut raised panel cutters are designed for 3/4″ thick panels. The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel, even on cross grain.

 

Freud TD52MDCB3 200mm Dia Raised Panels Cutter heads

Freud TD52MDCB3 200mm (Dia.) Raised Panels Cutter heads

Freud TD52MDCB3 200mm (Dia.) Raised Panels Cutter heads - This item is supplied with knives. Size shown between brackets is the max reborn possible. The items td52m cb3 and td52md cb3 are supplied with knives (2) the items td52m hb3 and td52md hb3 are supplied without knives.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.