LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.
CMT 192.000.02 5-Piece Upcut Spiral Bit Set, 1/2-Inch Shank
- 2 cutting edges, right hand rotation. 3/16, 1/4, 5/16, 3/8 and 1/2-inch diameters. Includes 5 downcut solid carbide spiral bits featuring either 1/4-inch or 1/2-inch shank. To be used either in cnc-machines or hand-held routers. Ideal for use on all soft and hard wood, plywood, laminates, mdf and plastic materials.
LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece
- 1/4-inch and 1/2-inch shanks. Solid micro grain carbide cuts smooth and stays sharp. 3 popular sizes included 1/4-inch, 3/8-inch, 1/2-inch diameter. Remove sawdust and wood chips from plunge cuts with upward shearing. Perfect for deep mortises and cutting dadoes in a router table.
CMT 199.001.11 Solid Carbide Upcut Ball Nose Spiral Bit with 1/8-Inch Diameter with 1/4-Inch Shank
- Use on machining centers, point/point machines, cnc routers & handheld routers with chucks/adaptors. Premium quality super-micrograin carbide, 2 upcut spiral cutting edges. For cutting, copying, panel sizing and any routing applications in solid wood or wood composites. High feed speed on well-clamped workpiece. 1/8-inch diameter, 1/2-inch cutting length, 1/4-inch-shank.
Infinity Tools 85-105, 1/4″ Shank Upcut Spiral Router Bit, 3/16″ Cutter Diam., 3/4″ Cutter Height
- Our solid carbide spiral bits provide remarkable performance and durability. These are you best choice for cutting grooves or dadoes in tough material like particleboard, melamine and other abrasive materials. Manufactured using state-of-the-art computer controlled machinery these micro-grain carbide cutters feature our optimal helix design and last up to 300% longer than regular router bits.
CMT 191.506.11 Solid Carbide Upcut Spiral Bit, 1/2-Inch Diameter by 3-1/2-Inch Length, 1/2-Inch Shank
- 1-1/2-inch cutting length, 2 cutting edges, right-hand rotation. Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection. For use on machining centers, point to point machines, cnc routers. Also for use on hand-held routers equipped with chucks or adaptors. For cutting, copying, sizing and routing wood products, plastic & laminates.
CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank
- Also for use on hand-held routers equipped with chucks or adaptors. For cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, cnc routers. 1-1/4-inch cutting length, 2 cutting edges, right-hand rotation. Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection.
LMT Onsrud 65-025 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
CMT 199.008.11 Solid Carbide Upcut Ball Nose Spiral Bit with 1/4-Inch Diameter with 1/4-Inch Shank
- 1/4-inch diameter, 1-inch cutting length, 1/4-inch-shank. Premium quality super-micrograin carbide, 2 upcut spiral cutting edges. Use on machining centers, point/point machines, cnc routers & handheld routers with chucks/adaptors. For cutting, copying, panel sizing and any routing applications in solid wood or wood composites. High feed speed on well-clamped workpiece.
Amana Tool 1/4″Dx1/4″Shk Upcut Plastic – 51444
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems.
LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle.
CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank
- Premium quality solid carbide, excellent finish on the workpiece lower side upward chip ejection. For use on machining centers, point to point machines, cnc routers. 1-inch cutting length, 2 cutting edges, right-hand rotation. For cutting, copying, sizing and routing wood products, plastic & laminates. Also for use on hand-held routers equipped with chucks or adaptors.
Eagle America 106-0202 Solid Carbide Spiral Upcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank
- You’ll get smoother cutting action with better results guaranteed 1/8-inchdiameter, 1/2-inch cut length, 2-inch overall length, 1/4-inch shank. Spiral router bits come in several configurations. Our production quality spiral bits combine effective chip removal with a continuous shearing action cut which cannot be obtained from a standard straight bit. Up-cut bits provide faster cutting while they pull chips up and out of the work or towards the router.
CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch
- Bit runs cooler and the edges will stay sharper, last longer and increases your shop productivity. Premium quality solid carbide excellent finish on the lower side of the workpiece. Sheer wood and wood products cleanly more efficient chip ejection than standard flush trim bits. 2-inch cutting length, 4-inch overall length. 2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates.
LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
