15 Best 8 32 Threads

 

Nylon 66 Pan Head Machine Screw Off-White 2 Phillips Drive 8-32 Thread Size 2 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 2″ Length, Fully Threaded, USA Made (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Hex washer head has a flange for additional grip with the mating surface. Slotted drive has a linear slot for use with a flat-blade driver.

 

Steel Tapped-Hole U-Style Clip-On Nut Plain Finish 8-32 Thread Size For 0079-0118 Material Thickness 0375 Edge Distance Pack of 25

Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, #8-32 Thread Size, For 0.079″-0.118″ Material Thickness, 0.375″ Edge Distance (Pack of 25)

Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, #8-32 Thread Size, For 0.079″-0.118″ Material Thickness, 0.375″ Edge Distance (Pack of 25) - Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Plain surface has no. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1-58 Length Fully Threaded Imported Pack of 50

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-5/8″ Length, Fully Threaded, Imported (Pack of 50)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1-5/8″ Length, Fully Threaded, Imported (Pack of 50) - Ensure a lasting hold for any project. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Drive system is a hexagon-shaped head. Hex nuts are appropriate for use in low-strength assemblies. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 8-32 Thread Size 38 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 3/8″ Length (Pack of 100) - Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Slotted drive has a linear slot for use with a flat-blade driver.

 

Nylon 66 Small Pattern Machine Screw Hex Nut Off-White 8-32 Thread Size 1132 Width Across Flats 964 Thick Pack of 100

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Off-White, #8-32 Thread Size, 11/32″ Width Across Flats, 9/64″ Thick (Pack of 100)

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Off-White, #8-32 Thread Size, 11/32″ Width Across Flats, 9/64″ Thick (Pack of 100) - Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Ensure a lasting hold for any project. Drive system is a hexagon-shaped head. Hex nuts are appropriate for use in low-strength assemblies. Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations.

 

Nylon 66 Pan Head Machine Screw Off-White 2 Phillips Drive 8-32 Thread Size 12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Designed to clip onto panels for quick alignment and a secure hold. Plain surface has no. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Steel is often used in applications where strength is the primary consideration.

 

YG-1 C0 Series Vanadium Alloy HSS Spiral Flute Tap Uncoated Bright Finish Round Shank with Square End Modified Bottoming Chamfer 8-32 Thread Size H3 Tolerance

YG-1 C0 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, #8-32 Thread Size, H3 Tolerance

YG-1 C0 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, #8-32 Thread Size, H3 Tolerance - 0276-inches thread length. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

Steel Acorn Nut Black Powder-Coated Finish Right Hand Threads Class 2B 8-32 Threads Pack of 10

Steel Acorn Nut, Black Powder-Coated Finish, Right Hand Threads, Class 2B #8-32 Threads (Pack of 10)

Steel Acorn Nut, Black Powder-Coated Finish, Right Hand Threads, Class 2B #8-32 Threads (Pack of 10) - The steel acorn nut has a black powder-coated finish. Steel is often used in applications where strength is the primary consideration. The acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. . The black powder coating offers durability. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. Several different nut styles fit a variety of application and installation requirements. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand.

 

Truss Head Break Away Screw 8-32 thread x 1-34  20-Pack

Truss Head Break Away Screw, #8-32 thread x 1-3/4” , 20-Pack

Truss Head Break Away Screw, #8-32 thread x 1-3/4” , 20-Pack - Excellent where screw length is not predetermined. Size #8-32 thread x 1-3/4″ long. 20 per bag. Low profile truss head. . This zinc plated steel screw breaks away at 1/4″ increments.

 

Steel Thread Cutting Screw Black Zinc Plated Truss Head Phillips Drive Type F 8-32 Thread Size 58 Length Pack of 50

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #8-32 Thread Size, 5/8″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #8-32 Thread Size, 5/8″ Length (Pack of 50) - Zinc plating resists corrosion and has a black reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

18-8 Stainless Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 1 Length Fully Threaded Imported Pack of 25

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 25)

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 25) - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

Steel Truss Head Machine Screw Zinc Plated Finish Meets ASME B1863 T15 Star Drive 8-32 Thread Size 12 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, T15 Star Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, T15 Star Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Imported (Pack of 100) - Designed to clip onto panels for quick alignment and a secure hold. Plain surface has no. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.

 

18-8 Stainless Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 58 Length Fully Threaded Imported Pack of 25

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 25)

18-8 Stainless Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 5/8″ Length, Fully Threaded, Imported (Pack of 25) - Plain surface has no. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Designed to clip onto panels for quick alignment and a secure hold.

 

Steel Machine Screw Zinc Plated Finish Pan Head Phillips Drive Meets ASME B1863SAE J82 14 Length Fully Threaded 8-32 Threads Pack of 100

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3/SAE J82, 1/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3/SAE J82, 1/4″ Length, Fully Threaded, #8-32 Threads (Pack of 100) - Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion resistance and has a reflective appearance. Meets asme b1863 and sae j82 specifications. Steel is often used in applications where strength is the primary consideration.