Infinity Tools 83-005, 15° Shaker Raised Panel Shaper Cutter, 3/4″ Bore
- 3-wing micro-grain carbide tips for a long life and repeated sharpening. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Shaker profile. Precision machined from fatigue-proof steel for extra strength.
Infinity Tools 83-002, Standard Raised Panel Shaper Cutter, 3/4″ Bore
- Precision machined from fatigue-proof steel for extra strength. 3-wing micro-grain carbide tips for a long life and repeated sharpening. Standard profile. 3/4″ bore x 4-5/8″ cutter diam x 1-1/2″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning.
Freud RP-C34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty. Two flute carbide design.
Freud UC-213 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore
- Overall diameter (d) carbide height (h) minor height (m) large radius (r1) small radius (r2) angle (a) bore diameter 4-15/16 11/16 21/64 1-31/32 1-3/8 23degree 3/4.
Freud UP223 Raised Panel Shaper Cutter For 3/4-Inch Stock, 1-1/4 Bore
- Covered by freud’s limited lifetime warranty. Kickback reducing design. Thick micrograin carbide tips.
Freud RP-A34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- C3 micro-grain tungsten carbide cutters. Covered by freud’s limited lifetime warranty. Two flute carbide design. Covered by freud’s limited lifetime warranty. Covered by freud’s limited lifetime warranty.
Sommerfeld’s Shaker Raised Panel Cutter w/Back-Cutter
- Cutting diameter 3-1/2″. Shank diameter 1/2″. Overall length 3-3/64″. The panel cutter is also preset to make a 7/32″ groove in the stile and rails. If you want a raised panel, our raised panel cutter also creates the same 22-1/2 straight bevel. The panel cutter can also be shimmed to increase the size of the panel to standard 1/4″ to use with your standard stile and rail cutters.
Raised Panel Shaper Cutters – B 3/4 | D 4-5/8 | CL 5/8 | R 15/16 | DG – | P B
- B = bore d = diameter cl = cutting length r = radius dg = degree p = profile. I m p o r t a n t select size above based on legend below. 100% satisfaction guaranteed.
Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters
- Thick micrograin carbide tips. Kickback reducing design. Covered by freud’s limited lifetime warranty.
Raised Panel Back Cutters – B 3/4 | D 3-1/2 | CL 1/2 | R 1/4
- B = bore d = diameter cl = cutting length r = radius. I m p o r t a n t select size above based on legend below. 100% satisfaction guaranteed.
Freud UC-215 Quadra-Cut Raised Panel Cutter for 3/4-Inch Stock
- 4-15/16″ diameter. 5/8″ height and 15/64″ minor height. The small cutter, with opposite shear angle, will push wood fibers down and shear them off leaving a crisp edge at the top of the panel. 10 degree angle with 3/4″ bore.
Bosch 85639M Raised Panel Cutter 1-1/2-Inch Diameter 5/8-Inch Cut 1/2-Inch Shank Router Bit
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Freud RP-E34 3/4-Inch Stock Knife Set For Freud RP1000 Or RP2000 Raised Panel Cutter
- C3 micro-grain tungsten carbide cutters. Two flute carbide design. 3-1/2″ raised panel cutter with a 1/2″ shank. Covered by freud’s limited lifetime warranty. Ogee with a step cove profile.
Freud UC-210 2+2 Raised Panel Shaper Cutter For 3/4-Inch Stock – 3/4 Bore
- Thick micrograin carbide tips. Kickback reducing design. Covered by freud’s limited lifetime warranty.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
