Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery)
- Belt clip allows for easy portability. On-board battery fuel gauge displays remaining run-time and built-in led light illuminates work surface. 1/2-inch single-sleeve ratcheting metal chuck with carbide jaws and variable speed trigger. 18-volt xc high capacity lithium-ion battery delivers longer life and run-time. Milwaukee 4-pole frameless motor maximizes tool efficiency to increase run-time.
Panasonic EY9798B 1/2-Inch Keyless Chuck for Panasonic 18-Volt Hammer Drills
- Grips round or hex shanks up to 1/2″. Reverse threaded set screw. Grip as small as 1/16″ round shanks.
Factory-Reconditioned Bare-Tool Milwaukee 2611-80 18-Volt Cordless M18 High Performance Hammer Drill (Tool Only, No Battery)
- Reconditioned milwaukee products have a one-year warranty through the milwaukee factory or an authorized service center. 18v m18 xc high capacity lithium-ion battery delivers longer life and run-time. Milwaukee 4-pole frameless motor maximizes tool efficiency to increase run-time. On-board battery fuel gauge displays remaining run-time. 1/2-inch single-sleeve ratcheting metal chuck with carbide jaws.
RIDGID Hyper-Lithium X4 1/2 in. 18-Volt Hammer Drill Kit
- Kit includes the wh18dbfl 18v brushless lithium ion impact driver that delivers up to 1,460 in/lbs of torque and up to 2,900 rpm, and is equipped with hitachi’s active control system that adjusts the rpm to the torque level to minimize the chance of stripping a screw. Powered by lithium ion battery technology for fade free, lightweight power and extended battery life. Includes the uc18yfsl rapid charger and carrying case. Kit includes the dv18dbfl 18v brushless lithium ion hammer drill that produces up to 440 in/lbs of torque and is equipped with a 1/2″ ratcheting metal chuck to minimize bit slippage. Equipped with brushless motor technology for maximum run time and durability. Kit includes (2) 18v 30ah lithium ion slide type batteries that deliver steady power for the duration of the charge. Covered by hitachi’s lifetime lithium ion tool warranty & 2-year lithium ion battery warranty.
Hitachi DV18DL 18-volt Lithium-Ion 1/2-inch Cordless Hammer Drill (Discontinued by Manufacturer)
- 570 in/lbs of torque to drill and drive through the toughest materials with ease. 570-inches per pound of torque to drill and drive through the toughest materials with ease. Comes with hitachi’s lifetime lithium-ion tool warranty. Two 30 ah hxp lithium-ion batteries for three times the life at half the weight of nicd or nimh batteries. Lithium-ion batteries for 3-times the life at half the weight of nicad or nimh batteries. Unique 2-step speed switch lets the user select from 4-speed settings for ultimate control. Lithium-ion batteries can be used in hitachi 18-volt dmr and dvf3 tools for even more value. Unique 2-step speed switch lets the user select from 4 speed settings for ultimate control. Convenient 5-position belt hook features an-integrated led work light. Lithium-ion batteries can be used in hitachi 18-volt dmr and dvf3 tools for even more value.
New Makita Lxt218 Lxt Cordless 18 Volt Hammer Drill & Driver Combo Kit & Case
- Lbs impact driver features variable speed 0-2300 rpm & 0-3200 ipm provides 1330 in. Speed 0-400 & 01700 rpm 4-pole motor delivers 560 in lbs of max torque and weighs 53. Extractorsenderes® pointsize use drill s-1———1/8. Hammer drill & driver combo kitmakita model lxt218factory sealed newauthorized dealer—.
Hitachi DV18DVC 18 Volt Ni-Cad Hammer Drill (Discontinued by Manufacturer)
- Max torque 380 in/lbs. 22-plus-2 stage clutch for high torque and/or precision driving. 0-21,000bpm impact rate. 2-speed transmission and variable speed switch allow for ultimate speed control. Variable 2 speed 0-400 and 0-1,500 rpm. 14-amp-hour batteries allow for longer run time and fewer battery charges. 22 stage slip clutch. Comes with a 5-year limited warranty. Carbon brushes for quick and easy brush changes. 1/2″ chuck.
Hitachi KC18DBFL 18-Volt Lithium-Ion Brushless Hammer Drill & Impact Driver Combo Kit (3.0Ah)
- Kit includes the wh18dbfl 18v brushless lithium ion impact driver that delivers up to 1,460 in/lbs of torque and up to 2,900 rpm, and is equipped with hitachi’s active control system that adjusts the rpm to the torque level to minimize the chance of stripping a screw. Kit includes (2) 18v 30ah lithium ion slide type batteries that deliver steady power for the duration of the charge. Kit includes the dv18dbfl 18v brushless lithium ion hammer drill that produces up to 440 in/lbs of torque and is equipped with a 1/2″ ratcheting metal chuck to minimize bit slippage. Powered by lithium ion battery technology for fade free, lightweight power and extended battery life. Equipped with brushless motor technology for maximum run time and durability. Includes the uc18yfsl rapid charger and carrying case. Covered by hitachi’s lifetime lithium ion tool warranty & 2-year lithium ion battery warranty.
Milwaukee 2692-24 18-Volt Hammer-Drill Impact Wrench Sawzall Reciprocating Saw and Worklight Combo Kit
- M18 work light provides a fold-away hook for hands-free use and a 135-degree rotating head to direct light at the work area. M18 high-performance 1/2-inch hammer drill/driver with milwaukee 4-pole frameless motor delivers 650 inch-pounds of torque. Backed by a five-year warranty. M18 sawzall reciprocating saw with patented gear-protecting clutch and counterbalance mechanism. M18 1/4-inch hex impact driver with the milwaukee 4-pole frameless motor delivers 1400 inch-pounds of torque.
Factory-Reconditioned: Hitachi DV18DSFL 18-Volt Lithium-Ion Cordless Hammer Drill
- Metal belt hook to keep tool close at hand. Powered by a 15 amp hour li-ion slide type battery for a steady level of power throughout the charge. 1/2-inch keyless chuck for quick tool-less bit changes and a metal belt hook for easy accessibility. 400 inch-pounds of torque to drill and drive through materials with ease. 2 stage adjustable clutch with 22 drive settings for optimal torque, 1 drill setting,1 hammer drill setting.
Milwaukee 2611-24 18-Volt Hammer Drill Kit
- Milwaukee cordless, high performance 18-volt hammer drill kit. 9-1/4-inch at 53-pounds backed by 5-year limited power tool warranty. Features 4-pole frameless motor to maximize tool efficiency to increase run-time 1/2-inch single-sleeve ratcheting metal chuck with carbide jaws and variable speed trigger. The on-board battery fuel gauge displays remaining run-time and built-in led light illuminates work surface. The kit includes 2 xc 28-ah li-ion batteries, a 1-hour charger, and an impact resistant case.
Bosch HDS181-02L 18-Volt Lithium-Ion 1/2-Inch Hammer Drill/Driver Kit with 2 High Capacity Batteries, Charger and L-BOXX-2
- Features 4-pole high performance motor for maximum power in a compact size. Includes l-boxx-2 for easy stack-able storage. New patented gear train and clutch enables compact design and light weight. Flexible power system (dd and hdd) are compatible with every 18-volt li-ion bosch battery. Ergonomic grip zone enables better gripping and greater comfort.
Hitachi DV18DSFL 18-Volt Lithium-Ion Cordless Hammer Drill (Discontinued by Manufacturer)
- For quick and tool-less bit changes. Download the. Powered by a 15 amp hour li-ion slide type battery for a steady level of power throughout the charge. Flashlight (ub18dal). Lifetime lithium ion tool warranty, 2-year lithium ion battery warranty. 22+2 stage adjustable clutch. Covered by hitachi’s lifetime lithium ion tool warranty & 2-year lithium ion battery warranty. Lightweight & compact. 1/2-inch keyless chuck for quick tool-less bit changes and a metal belt hook for easy accessibility. Weight than traditional batteries. (2) 15ah 18v lithium ion slide-type batteries (330139). So that light can be aimed as needed. Powered by a 15ah 18v lithium ion slide-type battery. Lighter. 400 in/lbs of turning torque. For a steady level of power throughout the charge, more ergonomic handle, 3x longer total battery life and 50%. Mechanical 2-speed gearing. Delivers. 1/2″” keyless chuck. For easy accessibility. With 22 drive settings for optimal torque, 1 drill setting and 1 hammer drill setting. Case (332825). Quick charger (uc18ygsl). Flashlight included that features a 5-position pivoting head. For precision and control. An impact rate of 0-5,600/0-21,000. Metal belt hook., At just 37lbs and 9-7/32″” in length. Double sided phillips #2 driver bit (983006). Dv18dsfl tool card. To drill and drive through materials with ease. 400 inch-pounds of torque to drill and drive through materials with ease. 2 stage adjustable clutch with 22 drive settings for optimal torque, 1 drill setting,1 hammer drill setting.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
